Graphite Coated Fiberglass Tape

Product Description

Graphite Coated Fiberglass Tape 

Constructed from a high temperature base fiberglass tape with graphite coating and heat treatment to clean the sizing and organic content.
Property:
Ideal tape used to wrap manifold ,header, turbo and exhaust
Used in places where no smokes allowed
Highly flexible and minimal shrinkage
Used at 750 degree C continuous, short time in 1000 degree C
 Manifold and header wrapping is widely accepted as standard practice for performance auto and racing applications. There are two reasons for this. 

First, by adding an insulation layer around the exhaust gas piping, it keeps the temperature of the gas from dropping, which means the density of the gas is kept lower longer, and lower density means easier flow through the exhaust system. Easier flow means more horse power due to reduced back pressure. Retaining heat in the exhaust flow, resulting in faster exhaust gas flow, also results in higher turbo charger spool speeds, resulting in a gain of horse power. 
Second, wrapping exhaust system components also reduces the temperature of other under-hood components and systems, reducing both radiated heat and convective heating of electrical components, intake air, fuel and hydraulic hoses. Reducing under-hood temperature also helps reduce hood paint thermal damage.

1000 degree F / 537 degree C:  Graphite Coated Fiberglass Woven Tape

Part number	Thickness (mm)	Width (mm)	Length (m)	Weight (g/m2)	Coating Weight (g/m2)
WFT110G	1.0	20-200	30	800	64
WFT115G	1.5	20-200	30	1200	96
WFT120G	2.0	20-200	30	1400	112
WFT125G	2.5	20-200	30	1660	130
WFT130G	3.0	20-200	30	2000	160
WFT150G	5.0	20-200	30	3200	256
WFT160G	6.0	20-200	30	4000	320

WFT115G is the ideal thickness and most popular choice for Turbo& Exhaust wrap. 
Fiberglass products are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.
Stainless Steel Free End Self Locking Clamps: Used to secure tape in place. Makes a neat low profile installation.  (Standard hand tools can be used to tighten and cut the remaining free end)
Size: 4.6mm W x 360mm L